TK4-Series KG5007 Speed Detecting Sensors  

 Cat.NO.£º91015wxr20ztt0401
Series KG5007 speed Detecting sensors include KG5007 and KG5007 and KG5007A speed detecting Sensor and KG5007D Intelligent speed Detecting Sensor .And KG5007D consists of sensor and intelligent detecting box .                             
This series of sensors, which are mine-used Intrinsic Safety sensors, can be used in mine underground with a danger of methane and coal dust explosion and also can be used in such vile environment as metallurgy, chemical industry, building material, traffic, electric power and gain. As the device of detection of speed (acceleration) and protection of low speed skidding, belt breakage and over speed, they can be used alone or be equipped with electricity control device of belt conveyor.
Two speed sensors which are equipped with KG5007D detects the speed of conveyor's belt and main roller's line respectively to get dispersion detecting.
KG5007D's intelligent detecting box is of general surface model.
Technical Parameters
Wide in speed measuring range, perfect in low speed performance, stable in running and great in anti-jamming
Installed with elastic bracket, friction connection mode, simple installation and wide use.
Technical Parameters of KG5007
Power Supply: DC 15 ¡« 24V, operating current ¡Ü 50mA. when used in a coal mine, it must be Intrinsic Safety power supply
Output: frequency signal, amplitude 5V, frequency f=200V (V is speed of belt)
Shell Protection Level: IP54
External Diameter of Imported Cable: 7 ¡« 12mm
Weight: 10kg
Technical Parameters of KG5007A
Power Supply: DC 15 ¡« 24V, operating current ¡Ü 100mA. when used in a coal mine, it must be Intrinsic Safety power supply
Output:
Frequency: amplitude 5V, frequency f=200V (V is speed of belt)
Current: 4 ¡« 20mA( load resistance ¡Ü 500 ¦¸)
Relay contact: contact capacity DC 27V, 1A
a. running signal output: when real speed of belt ¡Ý 0.8Vs, the contact closed;
b. belt breakage protection output: when real speed <0.3Vs continuously in 4s, the contact closed;
c. skidding protection output: when real speed between 0.3Vs and 0.8Vs continuously in 15s, the contact closed
Rated tape speed: 0.8 ¡« 6m/s
Shell Protection Level: IP54
External Diameter of Imported Cable: 7 ¡« 12mm
Weight: 10kg
Technical Parameters of KG5007D
Power Supply: AC220V ¡À 10%, 50Hz, not less than 5w
Detection Range: Tape speed 0 ¡« 9.9m/s
Output:
Frequency: Amplitude 5V, frequency f=200V (V is speed of belt)
Current: 4 ¡« 20mA (load resistance ¡Ü 500 ¦¸), also can output other voltage and current according to the user's requirement
Relay contact: contact capacity AC 220V, 2A, 50Hz, resistance load
a. running signal output: when real tape speed ¡Ý 0.8Vs, the contact closed;
b. belt breakage protection output: when real speed <0.3Vs or ¡Ý 1.05Vs continuously in 0 ¡« 99s (adjustable), the contact closed;
c. skidding protection output: when real speed ¡Ý 0.3Vs and <0.8Vs continuously in 0 ¡« 99s (adjustable), the contact closed
(when the main roller line speed detection sensor is connected, the upwards Vs is the real speed of sensor)
Rated tape speed: 0 ¡« 9.9m/s
Start delay comparison time: 0 ¡« 99s
Belt breakage/over speed protection delay time: 0 ¡« 99s
External Diameter of Imported Cable: sensor 7 ¡« 12mm Intelligent detection box 6 ¡« 12mm
Weight: sensor 10kg Intelligent detection box 5.7kg
¡¡
¡¡
¡¡